< Previous | Contents | Manuals Home | Boris FX | Next >
โManual Alignment โ
You can manually align the camera and solved tracker locations if you like. This technique is the usual approach for tripod-mode shots. You can also use manual alignment after using the Place tool on regular camera tracks, though it is more accurate to set up a coordinate system using the three-point method above.
To align manually, switch to the
3-D control
panel and the Quad or Quad Perspective view. Turn on the
Whole button on the 3-D control panel, which will select the currently-active camera or moving object (typically Camera01) in the viewports and also turn on the selection-lock button
. There's no requirement for the selection-lock to be on; it is usually convenient, so Whole turns it on automatically. Don't forget to turn it off (when you turn Whole off, Lock will turn off as well).
Then, use the move 
, rotate 
, and scale 
tools to reposition the camera/object using the viewports. As you do this, not only the camera/object will move, but its entire trajectory and its trackers as well. With the selection lock turned on, you can scale or rotate around any location in the 3D environment.
ย
ยฉ2025 Boris FX, Inc.ย โย UNOFFICIALย โย Converted from original PDF.
